Eduticles » Smart Process Design

Feeds

3038 items (316 unread) in 86 feeds

• Chemical Engineering (3 unread)
• Chemical Engineering World (6 unread)
• Chemical Engineering for Life (4 unread)
• Smart Process Design (9 unread)
• Young Chemical Engineering
• Chemical & Process Technology (12 unread)
• Chemical Professionals
• Chemical Department of Engineering NIT Warangal
• C&ENtral Science (14 unread)
• chem-bla-ics (15 unread)
• Computer Science
• Web Services With Axis2/C
• kilomentor (2 unread)
• elprocheminds
• spectroscopy
• Backyard Chemistry
• Mechanical Engineering
• Imperial's Department of Chemical Engineering (1 unread)
• Artikel Teknik Kimia - Chemical Engineering Article (9 unread)
• WORLD OF Chemical Engineering
• Polar Jobs
• CIVIL ENGINEERING ZONE
• Civil Engineering Job in Telecom (6 unread)
• The Culture of Chemistry (4 unread)
• Drug Discovery (20 unread)
• CHEMISTRY CONCEPTS
• The Realm of Organic Synthesis
• Carbon Chemistry
• OChemOnline (2 unread)
• Myoporum
• polymer processing
• Metallome (3 unread)
• BKBlog (1 unread)
• Zusammen
• Kash's tech Blog
• Chemjobber (12 unread)
• Henry Rzepa (10 unread)
• ChemCafe
• Phosphorus carbide
• Molecular Modeling Basics (4 unread)
• Indiana University Cheminformatics News
• Accelrys Blog (15 unread)
• Graphene Literature Reviews
• RajcaLab Weblog
• Making Graphite Work
• infiniflux! (4 unread)
• PMGB
• The road less travelled
• PaulingBlog (10 unread)
• InkSpot. Science. On Demand (1 unread)
• Chemistry in silico
• So much to do, so little time (3 unread)
• ChEMBL - Open Access Drug Discovery And Medicinal Chemistry Data (11 unread)
• A Chemistry Question, Daily
• Macromolecular Modeling Blog (5 unread)
• Practical Fragments (5 unread)
• Water in Biology (1 unread)
• Lanka BioGas
• NMR Analysis, Processing and Prediction
• CSEARCH NMR-Database
• Comments for The Mestrelab Blog (1 unread)
• University of Ottawa NMR Facility Blog (9 unread)
• Stan's NMR News (1 unread)
• AAPS - Professional Development (1 unread)
• Peace of Mind (2 unread)
• Process Improvement Blog
• B2E Resourcing (3 unread)
• Electronic Communication Engineering
• The Pride of Econometrician (2 unread)
• Nel's Physics Journal
• A Spoken Silence (10 unread)
• Gas Turbine Efficiency's Market Update (10 unread)
• Scholarshipnet (3 unread)
• Past Horizons' Weblog - World Archaeology (8 unread)
• Lane Architecture + Design (2 unread)
• Phil's Astronomy Blog (3 unread)
• Gwt Smalltalk
• My Wonderful World Blog (7 unread)
• American Historical Association Blog (23 unread)
• Liberal Arts and Minds (4 unread)
• Lean Manufacturing
• Mathematics Education Research Blog (5 unread)
• Music Theory
• Vermont Physical Education (3 unread)
• A Very Public Sociologist (27 unread)
• It's a Blend of Science and Art

Smart Process Design (9 unread)

• March 03, 2010
• 17:52

  The Eight-Hour Year: a metaphor of new graduates and young workers

   » ‎ Smart Process Design
  Have you ever been frustrated at a young hire in your office? “Kids these days! Schools don’t teach them anything! How can they keep making such stupid and obvious mistakes?” Or maybe instead, you are a person new and inexperienced in your profession. Have you ever been frustrated by the impatience and lack of guidance that [...] Related posts:

  1. How to be a Star Engineer
  2. Salary Comparison & Prediction Tools
  3. Engineering Ethics and a Database of Cases

  
  

  
• February 20, 2010
• 12:13

  Advice to Sketch and Design Machined Parts

   » ‎ Smart Process Design
  I found some great tips on designing machined metal parts. How to design parts that are cheaper and easier to produce. How to provide clear, helpful drawings and instructions to the machinist shop. How to avoid making costly mistakes. I found it pretty interesting even though I’m not in the business myself. Read it here: [www.omwcorp.com] Read below [...] Related posts:

  1. Introduction to Pressure Relief Valve Design Part 2 – Relief Scenarios and the Relief Rate
  2. Temperature Rise Due to Slapping
  3. Aspentech’s Hysys: Fluid Package (Thermodynamics) Notes

  
  

  
• February 11, 2010
• 20:13

  Calculate Renewable Energy Requirements

   » ‎ Smart Process Design
  Regardless how you feel about the issue, most people would agree that the Copenhagen Climate Conference certainly didn’t resolve very much.  But don’t worry – this post isn’t going to inundate you with more vague talk about climate change and energy independence1 – rather, it’s going to be introduce a fun, FREE, book: Have you heard [...] Related posts:

  1. Introduction to TRIZ: Brainstorm Design Problems by Avoiding Trade-Offs

  
  

  
• 20:04

  Microsoft Patch Causing Blue Screen of Death

   » ‎ Smart Process Design
  This beset a few people I know: KB977165 (aka MS10-015) is causing some people to get the blue screen of death. A solution for some, which did not work for me: [www.krebsonsecurity.com] Edit: Microsoft has withdrawn the patch for now. Should be safe to update. Related posts:My Favourite Unit Conversion Program Microsoft Visio Guidelines, Tricks, Keyboard Shortcuts Related posts:

  1. My Favourite Unit Conversion Program
  2. Microsoft Visio Guidelines, Tricks, Keyboard Shortcuts

  
  

  
• January 30, 2010
• 9:50

  Use VLOOKUP and HLOOKUP to use Data Tables in Calculations

   » ‎ Smart Process Design
  Small Excel tip today: use the Excel functions VLOOKUP and HLOOKUP to allow you to use tables of data in your calculations. You can configure these commands to “look for the closest match” or to “only find an exact match” by setting the final argument in the functions to TRUE or to FALSE. When could this [...] Related posts:

  1. Excel Chart Selector and Chart Cleaner
  2. Determine Pressure Drop in Straight Pipe
  3. Microsoft Visio Guidelines, Tricks, Keyboard Shortcuts

  
  

  
• 9:11

  List of Cool Date Ideas

   » ‎ Smart Process Design
  Valentines Day is coming up! So lets go off topic with some dating ideas. Everyone needs these. Even once you’re married, going on a “date” every so often is good relationship maintenance. But rather than make a list of Valentines Day date ideas, I’ll just drop a general list, so this post helps all days of [...] Related posts:

  1. Use VLOOKUP and HLOOKUP to use Data Tables in Calculations

  
  

  
• January 24, 2010
• 15:55

  Consider Finned Tubes to Increase Surface Area

   » ‎ Smart Process Design
  This post will introduce the practice of adding fins to shell-and-tube heat exchanger tubes to increase the surface area, and discuss when to consider it and when to avoid it. This is not a post about air coolers. Image of finned tubes: Heft Engineers Website Review: When fluid flows through tubes in a heat exchanger, the total [...] Related posts:

  1. Free Heat Transfer and Heat Exchanger Textbooks
  2. U Values for Heat Exchangers
  3. Controlling Equipment Articles by Walter Driedger

  
  

  
• January 16, 2010
• 10:41

  Salary Comparison & Prediction Tools

   » ‎ Smart Process Design
  It’s a new year, and maybe time for new jobs! Or at least performance reviews. Knowing your “fair salary,” or the “going market rate” that is paid for your position, can be very helpful. It’s also great to know when you’re a student graduating into your first real job. It’s a tricky subject, dependant on factors [...] Related posts:

  1. The Eight-Hour Year: a metaphor of new graduates and young workers

  
  

  
• December 30, 2009
• 9:31

  Engineering Ethics and a Database of Cases

   » ‎ Smart Process Design
  Let’s have a quick discussion about engineering ethics: what it is, why it’s important, and a database of ethical case rulings. I think this post might help you if you’re ever in an ethical conflict. In many places around the world, the title of a professional engineer is closely regulated by professional engineering bodies. Much as [...] Related posts:

  1. Top 3 General Chemical Engineering References
  2. Use Google to Solve Engineering Problems
  3. Engcom.net for Engineering News & Trivia

  
  

  
• December 20, 2009
• 21:50

  How to be a Star Engineer

   » ‎ Smart Process Design
  Interesting little article I found: How to be a Star Engineer. What the [Bell Laboratories] wanted to know was: what separates the star from the average performer? Is it innate or can star performance be learned? Could a program to improve productivity be designed that would help turn average performers into stars? The article emphasizes making the [...] Related posts:

  1. The Eight-Hour Year: a metaphor of new graduates and young workers
  2. My Favourite Unit Conversion Program
  3. Use Google to Solve Engineering Problems

  
  

  
• December 04, 2009
• 17:43

  Aspentech’s Hysys: Fluid Package (Thermodynamics) Notes

   » ‎ Smart Process Design
  Aspentech’s Hysys is a process simulation tool. You always have to pick a “fluid package” when you use the program: a thermodynamic method it will use to calculate properties, especially vapour-liquid equilibria. I watched an old “webinar” (presentation given through the Internet) on their property packages and took some notes. You can combine this post with [...] Related posts:

  1. Introduction to Pressure Relief Valve Design Part 2 – Relief Scenarios and the Relief Rate
  2. Introduction to Pressure Relief Valve Design Part 1 – Types & Set Pressure
  3. Introduction to Pressure Relief Valve Design Part 3 – Sizing Orifices and Piping

  
  

  
• 17:30

  Engcom.net for Engineering News & Trivia

   » ‎ Smart Process Design
  For some fun, check out Engcom.net. It has engineering news, weekly trivia, humour, and also some interesting articles. You can contribute to the site if you get into it. Related posts:Top 3 General Chemical Engineering References 3 Top Blogs: Chemical Engineering and Life Hacking articles Use Google to Solve Engineering Problems Related posts:

  1. Top 3 General Chemical Engineering References
  2. 3 Top Blogs: Chemical Engineering and Life Hacking articles
  3. Use Google to Solve Engineering Problems

  
  

  
• November 21, 2009
• 11:26

  Introduction to Pressure Relief Valve Design Part 3 – Sizing Orifices and Piping

   » ‎ Smart Process Design
  This is the third in a set of articles introducing the basics of pressure relief valve design from a process designer’s viewpoint. Read Part 1 here and Part 2 here. Orifice Sizes Now that you have the scenarios and all the fluid data for them, you can size the orifice. API 520/521 has some equations for [...] Related posts:

  1. Introduction to Pressure Relief Valve Design Part 1 – Types & Set Pressure
  2. Introduction to Pressure Relief Valve Design Part 2 – Relief Scenarios and the Relief Rate
  3. Piping and Instrumentation Diagram (P&ID) Designer Checklist

  
  

  
• 11:26

  Introduction to Pressure Relief Valve Design Part 3 – Sizing Orifices and Piping

   » ‎ Smart Process Design
  This is the third in a set of articles introducing the basics of pressure relief valve design from a process designer’s viewpoint. Read Part 1 here and Part 2 here. Orifice Sizes Now that you have the scenarios and all the fluid data for them, you can size the orifice. API 520/521 has some equations for [...] Related posts:

  1. Introduction to Pressure Relief Valve Design Part 2 – Relief Scenarios and the Relief Rate
  2. Introduction to Pressure Relief Valve Design Part 1 – Types & Set Pressure
  3. Introduction to TRIZ: Brainstorm Design Problems by Avoiding Trade-Offs

  
• November 17, 2009
• 6:23

  Introduction to Pressure Relief Valve Design Part 2 – Relief Scenarios and the Relief Rate

   » ‎ Smart Process Design
  This is the second in a set of articles introducing the basics of pressure relief valve design from a process designer’s viewpoint. Read Part 1 here or Part 3 here. Once you have decided to add a relief valve, know what equipment and pipes it is protecting, and choose the set pressure, you can finally begin [...] Related posts:

  1. Introduction to Pressure Relief Valve Design Part 3 – Sizing Orifices and Piping
  2. Introduction to Pressure Relief Valve Design Part 1 – Types & Set Pressure
  3. Consider Finned Tubes to Increase Surface Area

  
  

  
• November 09, 2009
• 17:09

  Introduction to Pressure Relief Valve Design Part 1 – Types & Set Pressure

   » ‎ Smart Process Design
  This is the first in a set of articles introducing the basics of pressure relief valve design from a process designer’s viewpoint. Read Part 2, relief scenarios and the relief rate, here. Part 3 on sizing orifices and pipes is here. Pressure relief valves (also called Pressure Safety Valves, PRVs, or PSVs) are a critical last [...] Related posts:

  1. Introduction to Pressure Relief Valve Design Part 3 – Sizing Orifices and Piping
  2. Introduction to Pressure Relief Valve Design Part 2 – Relief Scenarios and the Relief Rate
  3. Introduction to TRIZ: Brainstorm Design Problems by Avoiding Trade-Offs

  
  

  
• October 26, 2009
• 22:35

  The Economist Doing Business In… City Audio Guide

   » ‎ Smart Process Design
  Ever have to travel on business to major business cities like New York, London, Hong Kong, Buenos Aires, Beijing, or Moscow? Check out The Economist Doing Business In… Audio Guides. If you’re lucky enough to find a guide to the city you are visiting, you will get very practical advice on arriving, getting around, doing [...] Related posts:

  1. 3 Top Blogs: Chemical Engineering and Life Hacking articles

  
  

  
• October 19, 2009
• 20:05

  Make your own Halloween Costume Cheap and Easy

   » ‎ Smart Process Design
  Halloween is coming up, so maybe that means it’s time to dress up. You might have a party to go to, kids to take around the block, or an office to cheer up. But you don’t feel like spending $100 on store-bought costume or a rental, and you can’t sew.  What now? Can you do better? One [...] No related posts.
• 18:51

  Free Heat Transfer and Heat Exchanger Textbooks

   » ‎ Smart Process Design
  FREE, full-sized textbooks on heat transfer and heat exchanger design. You can download or view them as .pdf files right now. Interested? I’ve got two to share. A Heat Transfer Textbook, 3rd edition by John H. Lienhard IV and John H. Lienhard V. This is a senior-level heat transfer textbook for mechanical engineers; I found it [...] Related posts:

  1. U Values for Heat Exchangers
  2. Temperature Rise Due to Slapping
  3. Process Equipment Cost Estimate

  
• October 14, 2009
• 19:39

  My Favourite Unit Conversion Program

   » ‎ Smart Process Design
  There are lots of ways to solve unit conversion problems, but I thought I would share my favourite little program. Convert for windows. It’s simple, it’s free, it’s a tiny little tool, it has a good range of unit types covered. It’ll take you 1 minute to try it. Another good option online, when you have [...] Related posts:

  1. Use Google to Solve Engineering Problems
• October 05, 2009
• 20:02

  Crane Technical Paper No. 410 Revision in November 2009

   » ‎ Smart Process Design
  Crane Technical Paper No. 410 Flow of Fluids, also known as TP410, is remarkably important to the field of hydraulic calculations. With it’s standard equations and research-derived methods for quickly and practically calculating pressure loss due to fittings like valves and pipe elbows, it is on many an engineer’s desk. I have heard it described [...] Related posts:

  1. Determine Pressure Drop in Straight Pipe
  2. Updates to posts, comment policy
  3. Introduction to Pressure Relief Valve Design Part 1 – Types & Set Pressure

  
• September 21, 2009
• 21:13

  Introduction to TRIZ: Brainstorm Design Problems by Avoiding Trade-Offs

   » ‎ Smart Process Design
  TRIZ is a brainstorming method specifically designed to tackle engineering problems. The insight of TRIZ is that any design involves trade-offs or technical contradictions between two or more opposing features. But innovative solutions will apply one of the 40 TRIZ principles to avoid these trade-offs, and deliver a higher level of performance. The story behind TRIZ [...] Related posts:

  1. Introduction to Pressure Relief Valve Design Part 3 – Sizing Orifices and Piping
  2. Introduction to Pressure Relief Valve Design Part 1 – Types & Set Pressure
  3. Introduction to Pressure Relief Valve Design Part 2 – Relief Scenarios and the Relief Rate

  
• September 10, 2009
• 19:49

  3 Top Blogs: Chemical Engineering and Life Hacking articles

   » ‎ Smart Process Design
  Let me share my three favourite, relevant web-blogs with you. If you’ve found any of my articles interesting, be sure and check these out.  (But not before bookmarking me first! ) I am recommending them because they’re really worth your time. Two are chemical engineering blogs, and one is of interest to a wider [...] Related posts:

  1. Controlling Equipment Articles by Walter Driedger
  2. Top 3 General Chemical Engineering References
  3. The Economist Doing Business In… City Audio Guide

  
• September 02, 2009
• 18:31

  Piping and Instrumentation Diagram (P&ID) Designer Checklist

   » ‎ Smart Process Design
  Checklists are a good way to avoid making mistakes in any activity. Lets apply them to Piping and Instrumentation Diagrams (P&IDs) in today’s post. This checklist will help a chemical engineer that has to develop brand new P&IDs, or check other’s work. P&IDs incorporate a lot of the knowledge in any design. They require a lot [...] Related posts:

  1. Microsoft Visio Guidelines, Tricks, Keyboard Shortcuts
  2. Introduction to Pressure Relief Valve Design Part 1 – Types & Set Pressure
  3. Introduction to Pressure Relief Valve Design Part 2 – Relief Scenarios and the Relief Rate

  
• 18:12

  Confident body language while standing and walking

   » ‎ Smart Process Design
  Having strong, confident, excellent body language isn’t just about having good posture for posture’s sake, or making your mother happy. Non-verbal cues are important: people instinctually use them to size up your attitude, personality, and state-of-being. If you currently walk around bent over, or constantly looking down, or hunching against yourself, it can communicate things [...] No related posts.